Current industry-standard oil recovery equipment pulls roughly 3785 litres a minute, but as the Deep Water Horizon incident showed, that simply isn't good enough. So Wendy Schmidt -- as in wife of ex-Google CEO Eric Schmidt -- put up a $US1.4 million purse for any team that could extract 9400 litres a minute. Here's the winning design.
The Wendy Schmidt Oil Cleanup X Challenge also stipulated that, in addition to extracting 2500 gallons of oil from water, the device had to do so at a rate of at least 70 per cent oil-to-water collected. In January this year, over 350 ten-person teams took up the challenge, though in the end, Elastec walked away with the prize.
The Elastec Oleophilic Skimmer uses a grooved plastic disc that rotates through the water. Oil which is attracted to plastic, collects in the grooves as the wheel turns via the meniscus effect, and is then scraped off and funneled into a holding container. The grooves act to drastically increase the surface area of the plastic disc, allowing it to collect oil much more quickly than a smooth one. A single-wheel prototype demonstrated May 4, 2011 filled a 120-litre garbage can in just 35 seconds.
The full-size version used in the competition, which employed numerous wheels joined in parallel, pulled an average of 17,000 litres of oil out every minute. Even with simulated wave action, the skimmers were able to remove approximately 90 per cent of the oil that passed through it.
Elastec, a 140-person oil recovery firm based in Carmi, Illinois, was established in 1990. Reportedly, the Elastec team got the idea for an Oleophilic Skimmer when, at a local oil spill, a wayward plastic bucket was accidentally blown into the spill. Donnie Wilson, Elastec CEO and team leader of the X Challenge team, noticed that as the bucket turned, oil adhered to its sides.
Monster Machines is all about the most exceptional machines in the world, from massive gadgets of destruction to tiny machines of precision, and everything in between.