We’ve shown you how to build a Hackintosh with enough power to rival a Mac Pro, but for those of you who want a still powerful Mac on a budget you can build a Hack Mini. We’ll show you what you need to build it and walk you through the entire OS X installation.
Hackintoshing used to be a complicated process, but since Hackintosh expert tonymacx86 came around it’s gotten a lot easier. While I’ve been hackintoshing netbooks for awhile, I always shied away from building a machine because I was concerned about stability issues. After seeing how well Pash’s and Whitson’s Hackintoshes ran, and seeing how slow my less-than-a-year-old iMac had become, I decided it was time to do it.
I’ve had one week with the Hack Mini and so far it’s actually more stable than my iMac. It’s also twice as fast (according to benchmarks) and cost half as much (if you already have an extra monitor). The whole process was very easy and produced a better machine. While I had Whitson around to help me out, if you have some knowledge of how to build a computer this is likely something you can do. I am still surprised that the process was so easy and that the machine is so fast for so little money. Now it seems silly to ever buy a Mac desktop again.
What You’ll Need
At the time of this writing, the parts necessary for this build came to a total of $US599.65. There are certainly other, potentially cheaper components you could use to make your Hack Mini but we know this build works. It’s heavily based upon TonyMac’s CustoMac Mini build, using only a few parts that are a little different (but work all the same). We built this one ourselves, adding a few extras like an SSD (which is optional, to keep the build under $US600), and it runs beautifully. Here’s what you’ll need:
- Gigabyte GA-H55N-USB3 Motherboard $US104.99
- Intel Core i3 Processor i3-540 3.06GHz 4MB LGA1156 CPU $US110
- ZOTAC nVidia GeForce GT240 512 MB DDR3 DVI/HDMI PCI-Express Video Card $US84.99
- 2x2GB Corsair PC3-10666 1333Mhz Dual Chanel 240-pin DDR3 Desktop RAM $US43.99
- Western Digital 1TB SATA III 7200 RPM 32MB Cache Desktop Hard Drive $US59.99
- SilverStone SG05BB-450 ALL Black Plastic/SECC Mini-ITX Computer Case with SFX 450W 80+ Bronze Certified/Single +12V rail Power Supply $US119.99
- Sony Optiarc 8X SATA DVD+/-RW Slim Drive $US34.99
- StarTech.com MCSATAADAP Micro SATA to SATA adaptor Cable with Power $US11.71
- Mac OS X 10.6 Snow Leopard $US29
- OPTIONAL: OCZ Agility 120GB SSD $US199.99 (note: this is optional and not included in the total cost of the machine)
Note: You may be like me and not use an optical drive much, but don’t try to build this machine without one. You need an internal optical drive or you will not be able to complete the entire process.
Another note: The VGA port on your video card isn’t going to work. DVI and HDMI will work just fine, but don’t plug anything in to the VGA port or you will be disappointed.
Total cost: $US599.65
Once you’ve got all the hardware in hand, you’ll need to assemble your computer. Building a Hackintosh isn’t any different than building a regular PC. You’ll need to mount the motherboard to your case, install all the components listed above, and plug in all the necessary cables. If you’re not sure of anything, read the manual for the motherboard. It’s worth noting that the GA-H55N (the motherboard used in this build) uses some less-than-usual names when labelling everything, but you won’t have any trouble figuring out what’s what. If you’re new(-ish) to the computer building process, have a look at our guide to building a computer from scratch.
Once you’ve finished putting it all together, turn on the machine and make sure you see your BIOS screen, which will include its firmware version (3, 4, or 5). Write down the firmware version now. You will need it later. If everything looks good, it’s time to start hackintoshing.
Installing Mac OS X 10.6
- A Mac OS X 10.6 Snow Leopard Install DVD
- iBoot (which you get from tonymacx86, but you’ll need to register for the forums in order to download it)
- MultiBeast 3.1.0 or later (also from tonymacx86, and also requires forum registration for download)
- Mac OS X 10.6.8 Combo Update (direct download from Apple)
- Lnx2Mac’s Realtek 81XX Installer (so your Ethernet card will work)
- The relevant DSDT file for the GA-H55N motherboard
To get the DSDT file you need, go here and choose the following from the “Choose your Motherboard” drop-down menu:
- Socket 1156
From there you’ll see options for F3, F4 and F5. These numbers correspond to the firmware versions on your motherboard. Assuming you did, indeed, write down the firmware version in your BIOS when you test-booted the machine earlier, you’ll know which one of these options to pick. If not, test boot again and look for the firmware version on the BIOS boot screen. It’s most likely F5, but don’t guess. Guessing wrong means your Hackintosh will not work properly.
Prep Your Tools
Once all of that’s ready, insert your iBoot CD and plug in your USB thumb drive (or external optical drive with the Snow Leopard install DVD inside). Also plug a USB keyboard into one of the frontside USB ports on your Hack Mini. (While the ports in the back should work during boot time they didn’t for me, but there were no issues with the ones up front.) Next, turn on your Hack Mini and hold the delete key while it boots. This will let you edit your BIOS settings and select a boot order. Once the edit screen loads, follow these steps:
- Choose “Advanced BIOS Settings”.
- If “Quick Boot” is enabled, disable it.
- Set the “First Boot Device” to CDROM.
- Set the “Second Boot Device” to Hard Disk. (The third can be set to whatever you want.)
- If you have more than one hard drive installed, go up to “Hard Disk Boot Priority” and hit enter. Make certain that the hard disk you’re going to use for Mac OS X is up at the top. If not, move it to the top by selecting it with the arrow keys and pressing the Page Up key until it gets there. Note: this is just for hard disks — your optical drive is still first on the list from the change you made earlier.
- Press the escape key until you get to the main BIOS settings page (where you started).
- Press F10 to save your changes. You’ll be asked if you’re sure you want to do this. Type Y if there isn’t already a Y typed for you and press enter.
Run the OS X installation just like you would on any other Mac. In order to do this, you may need to format your internal hard drive first. If you do, just open the Utilities menu and choose Disk Utility. You’ll be able to format your hard drive (or SSD) from there.
Once the installer finishes it may say it failed to install OS X. This did not happen with me but it’s a common quirk with Hackintosh installations. If it happens to you, don’t panic — everything is just fine. Go ahead and restart your machine and leave your iBoot CD in the optical drive. When you boot this time, you’ll have a new option: your hard drive. Boot from it and you’ll be on your new OS X desktop in minutes.
Configure Your New Hack Mini
Note: It may look like things are missing here, as we’re not checking any boxes to install bootloaders or graphics drives, but don’t worry — MultiBeast will take care of it all for you.
- Copy the DSDT file you downloaded to the desktop.
- Open up MultiBeast and Lnx2Mac’s Realtek driver installer but do not install anything
- Open the Mac OS X 10.6.8 Combo Installer and run it. When it finishes, do not restart.
- With MultiBeast open, choose check the following boxes:
- UserDSDT Install
- System Utilities
- Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> ALC8xxHDA
- Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> AppleHDA Rollback
- Drivers & Bootloaders -> Kexts & Enablers -> Disk -> JMicron36x (AKA GSATA) -> JMicron36x SATA
- Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> FakeSMC Plugins
- Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> USB 3.0 – NEC/Renesas
- Anything in the OSx86 Software category you want to install (but none of it is required)
- Click the Install button on MultiBeast and wait for the installer to finish.
- Install Lnx2Mac’s Realtek 81XX driver (make sure you check the release version and not the debug version during installation).
- Eject the iBoot CD and click the Restart button on your Mac OS X 10.6.8 Combo Update’s installer window.
- Make sure your sound and Ethernet are working. If not, you may have done something wrong and will need to run MultiBeast again to install those drivers. Once you’ve got all of that working, there’s one last thing to do.
- Re-run MultiBeast and select just one option: customisation -> Boot Options -> 64-Bit Apple Boot Screen. This will make your graphic’s card run at full capacity, utilise OS X’s 64-bit capabilities, and a bunch of other little nice enhancements as well. Once you’ve installed this option, reboot and you’re done.
The only thing that won’t work after a successful installation is HDMI audio, but there is a way to get this working. Tonymacx86 has posted a process to get functional HDMI audio on most Hackintoshes, including this one. Since it isn’t vital we’re not going to cover it here, but if HDMI audio is important to you then you will want to read those instructions.
Congratulations, you now have your very own Hack Mini!
Republished from Lifehacker