In the previous lesson we covered the basic settings on your camera. Today we’re jumping into the fun stuff: manual mode. We’ll learn the details about shutter speed, ISO and aperture, as well as how those settings affect your photos.
If you’re following along with your camera, be sure to set it into manual mode so you can access every setting we’re going to discuss.
Aperture is often the most difficult concept for people to grasp when they’re learning how their camera works, but it’s pretty simple once you understand it. If you look at your lens, you can see the opening where light comes through. When you adjust your aperture settings, you’ll see that opening get bigger and smaller. The larger the opening, or wider the aperture, the more light you let in with each exposure. The smaller the opening, or narrower the aperture, the less light you let in. Why would you ever want a narrow aperture if a wider one lets in more light? Aside from those situations where you have too much light and want to let less of it in, narrowing the aperture means more of the photograph will appear to be in focus. For example, a narrow aperture is great for landscapes. A wider aperture means less of the photograph will be in focus, which is something that’s generally visually pleasing and isn’t seen as a downside. If you’ve seen photographs with a subject in focus and beautiful blurred backgrounds, this is often the effect of a wide aperture (although that’s not the only contributing factor — remember, telephoto lenses decrease depth of field as well). Using a wide aperture is generally considered the best method for taking in more light because the downside — less of the photograph being in focus — is often a desired result.
Aperture is represented in f-stops. A lower number, like f/1.8, denotes a wider aperture, and a higher number, like f/22, denotes a narrower aperture. Lenses are often marked with their widest possible aperture. If you see a lens that is a 50mm f/1.8, this means it’s widest aperture is f/1.8. The aperture can always be set to be more narrow, but it won’t be able to go wider than f/1.8. Some lenses will have a range, such as f/3.5-5.6. You’ll see this on zoom lenses, and it means that when the lens is zoomed out to the widest position it’s f/3.5, but when it’s zoomed in all the way it can only have an aperture as wide as f/5.6. The middle changes as well, so halfway through the zoom range you’ll end up with a widest aperture of about f/4.5. An aperture range is common with less-expensive zoom lenses, but if you pay more you can get a standard aperture throughout the range.
That’s pretty much all you need to know about aperture. The important thing to remember is that a wide aperture, like f/1.8, lets in more light and provides a shallow depth of field (meaning less of the photo appears in focus). A narrow aperture, like f/22, provides deeper focus but lets in less light. What aperture you should use depends on the situation and the type of lens you’re using, so experiment to see what effects you get and you’ll have a better idea of how your aperture setting affects your photographs.
Photo by Digi1080p
When you press the shutter button on your camera and take a picture, the aperture blades take a specific amount of time to close. This amount of time is known as your shutter speed. Generally it is a fraction of a second, and if you’re capturing fast motion it needs to be at most 1/300th of a second. If you’re not capturing any motion, you can sometimes get away with as long of an exposure as 1/30th of a second. When you increase your shutter speed — the length of time where the sensor is exposed to light — two important things happen.
First, the sensor is exposed to more light because it’s been given more time. This is useful in low light situations. Second, the sensor is subject to more motion which causes motion blur. This can happen either because your subject is in motion or because you cannot hold the camera still. This is fine if you’re photographing a landscape at night and the camera is placed on a tripod, as neither the camera nor your subject is going to move. On the other hand, slow shutter speeds pose a problem when you’re shooting handheld and/or your subject is moving. This is why you wouldn’t want a shutter speed any slower than 1/30th of a second when photographing handheld (unless you’re known for your remarkably still hands).
In general, you want to use the fastest shutter speed you can but there are plenty of circumstances where you’d choose a slower shutter speed. Here are a few examples:
- You want motion blur for artistic purposes, such as blurring a flowing stream while keeping everything else sharp and un-blurred. To accomplish this you’d use a slow shutter speed like 1/30th of a second and use a narrow aperture to prevent yourself from overexposing the photograph. Note: This example is a good reason to use the Shutter Priority shooting mode discussed in the previous lesson.
- You want an overexposed and potentially blurred photograph for artistic purposes.
- You’re shooting in low light and it’s necessary.
- You’re shooting in low light and it’s not necessary, but you want to keep noise to a minimum. Therefore you set your ISO (film speed equivalent) to a low setting and you reduce your shutter speed to compensate (and let in more light).
These aren’t the only reasons but a few common ones. The important thing to remember is a slow shutter speed means more light at the risk of motion blur. A fast shutter speed means low risk of motion blur while sacrificing light.
ISO is the digital equivalent (or approximation) of film speed. If you remember buying film for a regular camera, you’d get 100 or 200 for outdoors and 400 or 800 for indoors. The faster the film speed the more sensitive it is to light. All of this still applies to digital photography, but it’s called an ISO rating instead.[imgclear]
Photo by CNET Australia
The advantage of a low ISO is that the light in a given exposure is more accurately represented. If you’ve seen photos at night, the lights often look like they’re much brighter and bleeding into other areas of the photo. This is the result of a high ISO — a greater sensitivity to light. High ISOs are particularly useful for picking up more detail in a dark photograph without reducing the shutter speed or widening the aperture more than you want to, but it comes at a cost. In addition to lights being overly and unrealistically bright in your photos, high ISO settings are the biggest contributors to photographic noise. High-end cameras will pick up less noise at higher ISOs than low-end cameras, but the rule is always the same: the higher you increase your ISO, the more noise you get.
Most cameras will set the ISO automatically, even in manual mode. Generally you can stick with the same ISO setting if your lighting situation doesn’t change, so it’s good to get used to setting it yourself. That said, sometimes lighting changes enough in dark, indoor settings that letting the camera set it for you automatically can be helpful — even when shooting manually.
Combining the Settings
In manual mode you set everything yourself (except ISO, if you set it to automatic), so you have to think about all three of these settings before you take a photograph. The best thing you can do make this easier on yourself and hasten the decision is to give priority to one of the settings by deciding what’s most important. Do you want to ensure a shallow depth of field? If so, your priority is your aperture. Do you want the most accurate representation of light? Make ISO your priority. Do you want to prevent as much motion blur as possible? Concentrate on shutter speed first. Once you know your priority, all you need to do is set the other settings to whatever is necessary to expose the right amount of light to the photograph.
In manual mode your camera should let you know if you’re overexposed or underexposed by providing a little meter at the bottom (pictured to the left). The left is underexposed and the right is overexposed. Your goal is to get the pointer in the middle. Once you do that, snap your photo, and it should look just how you want it.
We’re all done learning about how your camera works in all its modes. Tomorrow we’re going to explore composition and technique.
Republished from Lifehacker