Why You Should Do This
Last time we threw together a guide like this, things were different. Snow Leopard was but a glint in Steve Jobs' eye, and in terms of hardware, the Mini 9 was the best thing going — it was pretty much the only netbook you could guarantee would work perfectly. Not to mention the hackintosh process was much, much more complicated. And riskier! And yet, despite all this, it was easy to recommend loading a Mini up with OS X, because to put it bluntly, the results were fantastic.
But the Mini 9 was a bit too small for regular use, and even if it's still pretty easy to buy one, it's not officially part of Dell's product line anymore. Fast forward to now: the Mini 10v is a (quite similar) replacement for the 9, with a slightly larger screen, 160GB HDD standard and 1GB RAM. Most importantly, the keyboard is a bit larger, and the price is wonderfully low: $US300/AU$549 for a netbook that's completely ready for hackintoshing. Or to put it another way, the 10v is a $US300/AU$549 Apple netbook.
And it isn't just the hardware that's changed, it's the software. Snow Leopard is fast—faster than 10.5—and its new interface features, like Dock Expose, make using OS X on a netbook even easier. Finder is faster, Quicktime has a new interface. It's a pretty big upgrade from Leopard, is what I'm trying to say.
And installation tools have changed, too. Netbook hackintoshing used to be an all-day process, with external optical drives, Terminal commands, and numerous terrifying driver tweaks. Today, there are simple software utilities to take care of this for you. So let's recap: Since 2008, the hardware has gotten cheaper and better, OS X more mature, and the installation process easier. Oh yeah, and Snow Leopard retail costs $US30/AU$39. There's never been a better time to hackintosh — not by a long shot.
That said, one thing hasn't changed. The same disclaimer:
Even though we're using a standard retail-purchased copy of OS X, the disclaimer: Apple does not like Hackintoshing. It violates the OS X EULA, and probably won't make the Dell folks too happy either, should you need to return your hacked Mini 9 for service. So, as always, proceed at your own risk.
What You'll Need
• Dell Mini 10v. The stock version, at $US300/AU$549, works perfectly.
• BIOS version lower than A06 (A05, A04, A03 all work fine)
Downgrade instructions are available here, though they require a Windows PC for creating a bootable DOS flash drive
• Retail copy of OS X 10.6.x (NOT an OEM copy that comes with a new Mac). An ISO will do fine here.
• An 8GB (or larger) USB flash drive, the faster the better. External HDDs will work too.
• A Mac with a working optical drive, for preparing your flash drive
• Netbook BootMaker (a Mac application)
Preparing Your Flash Drive
1. Insert your flash drive and OS X Retail install disk into your computer
2. Open Disk Utility (searching in Spotlight is the easiest way to get to this)
3. Select your flash drive from the list on the left. Make sure to select the drive itself, not any partitions you may have written to it before.
6. Select "Master Boot Record". This will ensure that your Mini 10v can boot from your flash drive. Select a name for your partition—doesn't really matter what—and apply your changes. Keep in mind this will delete anything you have on your flash drive right now, so back it up if need be.
7. Once this is done, move from the "Partition" screen to the "Restore" screen
8. For your Source, select (by dragging) the OS X install disk from the left panel. Make sure this is the item called something to the effect of "Mac OS Install DVD", not "Optiarc DVD" or some other hardware title. For the destination, drag your newly-prepared partition over. Click restore.
Ok, once that slog is done, it's time to let Netbook BootMaker do its magic. And let me be clear: it is magic. What this utility will do is install a special bootloader on your flash drive, which allows your netbook to begin an OS X install. It also throws in a few driver tweaks, to make sure your 10v, y'know, works.
9. Running BootMaker is easy—just open the app, select your OS X partition on your newly-minted flash drive, and tell it to GO GO GO.
Aaaaand that's it! You're ready to start hackintoshing.
Installing OS X
First, you're going to need to do some light prep on your 10v.
10. Jump into the BIOS, since we're going to need to check on a few things. You can do this by restarting the 10v, and hitting F2 as the Dell logo first shows up.
11. Double-check to see if you have the right BIOS. As long as it's lower than A06, you're fine. If not, refer back to the "What You'll Need" section.
12. Cycle over to the "Advanced" screen, where you'll see a list of options. USB BIOS Legacy support should be enabled, as should Bluetooth.
14. Once you're done, press F10 to save and exit. If you're ready to dive straight into the install, make sure you have your prepped USB drive plugged in and ready to go.
15. Plug your computer in, if it's not already. You don't want your netbook to die halfway though — this will only lead to sadness.
16. HAHA, BEHOLD! This screen, it's awfully Apple-y! But you're not done yet. Let the install complete, following the prompts as you go. When it asks you where to install OS X, select and clear the entire HDD of your device. This will delete everything, so make sure you have your stuff backed up.
Odds and Ends
By and large, your install should work out of the box. Sleep, shutdown/startup, sound, keyboard shortcuts, battery indicators and anything else you can think of should be present. One thing that's immediately irritating, though, is the trackpad: it's kinda shitty. Here's what you need to do:
17. Go here, and download the attached trackpad driver.
18. Open Finder on your 10v, and press CMD+Shift+G (on this keyboard, that's Alt+Shift+G.) In the box that comes up, typed "/Extra" and press enter. This will bring you to a hidden folder. Copy the .kept file you've download into the Mini10vExt folder, making sure to back up the one you're replacing.
19. Run the app in the "Extra" directory called UpdateExtra, which will alert OS X to the new drivers. Restart your computer.
You should see, as you could before, a panel in the OS X preferences where you can adjust trackpad settings. Play with them as you like — two finger scrolling is great. The main difference with the new driver, though, is that it kills the bottom part of the trackpad, where the two buttons are supposed to be. This makes clicking and dragging, which was just about impossible before, work perfectly.
The only other issue you're likely to run into is the occasional too-big settings screen. Here's an obscenely clever workaround for that.
So There You Go
So that's about it! Please add in your experiences in the comments — your feedback is a huge benefit to our how-to guides. Good luck with your own Hackintoshing!